Phased Array Ultrasonic Flaw Detector CTS-602
Fitur Ultrasonic Flaw Detector CTS-602:
- Clear Image
- linear Pencitraan
- sektor Pencitraan
- Posisi Flaw akurat dan Ukuran
- Ultrasonic Imaging dan A-scan Tampilan
Fungsi Ultrasonic Flaw Detector CTS-602:
- Mudah dioperasikan dan user-friendly interface.
- Mode array yang konvensional dan bertahap yang tersedia dalam sistem yang sama, yang nyaman untuk pengujian dan evaluasi inspektur.
- Sampai dengan 32 saluran, kompatibel dengan probe 16/32/64/128-element.
- Bi-polar transmisi gelombang persegi dan disesuaikan lebar pulsa transmisi.
- Transmit fokus yang single-point dan menerima fokus yang dinamis.
- Unggulan dengan pemindaian linier, pemindaian linier fixed-angle dan pemindaian sektor.
- Sebuah monitor VGA atau proyektor dapat dihubungkan melalui port VGA, baik untuk promosi, demonstrasi dan multi-media pembelajaran untuk deteksi cacat kursus pelatihan.
- File yang tersimpan dalam sistem dapat diekspor ke komputer untuk membuat laporan melalui port USB.
Function | Conventional | Phased Array |
System Bandwidth (-6dB) | 0.5~15MHz | 1-10MHz |
A/D Sampling Frequency | Max 240MHz | 120MHz |
Probe Connector | 2, BNC or Lemo Connectors | 1, for supporting 16/32/64/128 elements probes, featured with auto recognition |
Active Aperture | —— | 2-32, the upper limit depend on the probe element number |
Pulse Generator | Type: Negative Spike Pulse; Voltage: approx 370V; Frequency: 20-500Hz; Power: Low/High | Type: Bipolar Square Wave Pulse; Transmit Voltage: 20~150V, Step:10V; Pulse Width: 40~500ns, Step: 20ns; Frequency: 100-8KHz; Transmit Delay: 0-20µs; Resolution: 5ns |
Receiver | Gain: 0-110dB, Step: 0.5/1/2/6/12; Frequency Band (-6dB):1~4MHz/0.5~15MHz; Damping: Low/High; Rectify: Positive, Negative, Full, Filter, RF | Gain: 0-80dB; Frequency Band (-6dB):1~10MHz; Delay: 0~20µs; Resolution: 3.125ns. |
Focus | —— | Transmit: Single focus; Receive: 160MHz hardware real time dynamic focus; Max Range: 1008 focus points per scan line. |
Filter | Auto adjustment based on operating frequency band | Auto adjustment based on probe frequency |
Scan Type | —— | Linear/Sector/C/D scan |
Scan Line | —— | Linear Scan: Max 256 lines; Sector: Max 128 Lines |
Scan Angle Range | —— | Linear: -45°~+45°; Sector: -80°~+80° |
Scan Range | 0-6000mm (steel longitudinal wave), continuous and adjustable, Min Display Range: 10mm | 0~1000mm (steel longitudinal wave) |
Material Velocity | 1000~10000m/s | 1000~10000m/s |
Display Delay | -100~1000mm (steel longitudinal wave) | 0~1000mm (steel longitudinal wave) |
Probe Zero | 0~200µs | —— |
Reject | 0~80 Linear Reject | —— |
Curve Function | DAC | —— |
Auxiliary Function | A-Scan echo freeze; auto calibration; angle measurement; peak value memory; parameter output; AWS D1.1/D1.5; USB disc storage | —— |
Alarm Signal | Sound and Light alarm (build in buzzer and panel LED) | —— |
Test Point Selection | Peak Value, Front, J-Front | Peak Value |
Unit | mm/inch | mm/inch |
Measurement | 2 Gates: it can measure echo amplitude, sound path, horizontal distance, vertical distance and distance between 2 gates | 2 Gates: itu dapat mengukur gema amplitudo, jalan suara, jarak horizontal, jarak vertikal dan jarak antara 2 gerbang, 2 pengukuran kursor: itu dapat mengukur posisi horisontal dan vertikal dan jarak antara kursor pada gambar |
Horizontal Linearity | «0.5% | —— |
Vertical Linearity | «3% | —— |
Attenuator Error | 12dB ± 1dB | —— |
Dynamic Range | »30dB | —— |
Far field resolution | »26dB | —— |
Electric Noise Level | in initial state, when the detection range and gain are set to maximum, it is «20 (Frequency band 1-4MHz) | —— |
EN Norm | EN-12668-1 compliant | —— |
Informasi dan pemesanan hubungi contact support kami.
Permintaan Penawaran
Segera lakukan permintaan penawaran sekarang juga untuk mendapatkan harga khusus!